Laser marking machine models

Laser marking; It is the process of writing codes to the desired point of the products using the intense beam. With this application, branding can be made on many different materials such as copper, titanium, steel, cardboard, wood, glass and plastic. With the process of creating codes on the materials, the serial numbers, expiration dates and similar information of the products can be written. With this laser writing machine, you can effectively meet barcode, marking and all other printing needs.

Normally different methods can be used to write information on the products. However, the method mentioned here is a necessity for ensuring ISO standards and increasing the competitiveness of the products. This laser processing machine; It covers different varieties such as UV, fiber and carbon.

Laser marking machines use an intensive beam for writing the desired codes on the surfaces of the products. The beam in question reaches the surfaces of the products and enters the reaction and allows the creation of the desired codes.

The desired area is targeted during the process and the codes are created at the desired points. Thanks to the high -quality application, the codes are successfully created on each surface and have a read appearance. The application is permanent and thus provides a sense of reliability of the product.

The laser marking machine is divided into different species in itself and the use varies accordingly. In addition, the type of material and application to be worked on causes the use of use.

During the use, the usage instructions of the machine should be complied with and the necessary safety measures should be taken. Thanks to its features, a use exhibited in accordance with the instructions is completely safe.

As Electrojet, we will be doing all your problems for you both during the installation of the machine and with our service and remote support services.

Many products can be branded with this marking machine, also known as laser scraping. At this point, the target product range will vary depending on the marking machine to be preferred. Ultimately, the laser used by these tools has a wavelength and the laser in each tool is therefore different.

When the machine is preferred for the target materials, the expectations will be easily met. The products to be marked with laser are generally as follows:

• Wood
• Pipe
• Pine
• Metal
• Plastic
• Cardboard
• Silver
• Steel
• Rice
• Gold

Carbon (CO2) laser is the lasers in which the mixture formed as a result of electrical stimulation of carbon dioxide gas is used. It is generally preferred in coding organic materials . In non -metal and plastic type materials, it is a suitable technology for coding product information .

It provides high code quality is one of the most important features of this technology. They have high efficiency and the average use of use varies between 25,000 and 40,000 hours. It gives effective results in materials such as glass, wood, acrylic, textile, paper, leather, stone, plastic and rubber .

Fiber lasers in the solid state laser group produce the beam required through the core laser. Then, they raise the radiation in question thanks to the glass fibers specially designed and energized through the pump diodes.

Fiber lasers have a wavelength of 1,064 micrometers and are 100 times more intense than CO2 lasers. Thanks to its high density, it gives the desired results for operations such as backbone and metal coding, metal scraping and high contrast plastic marking .

This technology, also known as a metal marking machine and does not require much maintenance, is at least 25,000 hours. When used in accordance with the instructions, this period can be up to 100,000 hours.

Fiber laser marking technology should be preferred when the branding of non -organic materials such as plastic and metal and this should be done with high contrast. It must be operated in a closed cabin and by taking the required standard security measures.

With fiber laser marking technology, serial numbers and barcodes can be branded on materials such as ceramics, metal and plastic . The technology in question is accepted as a high -quality marking application solution.

The process, known as laser printing or laser marking, is to create code with beam on the material. In this process, burning process is used. Consequently, prints with the laser printing machine will never be deleted and have a permanent feature . This is valid for all materials in which laser marking technology can be used .